This Suitcase Type outdoor waterproof high power military drone WiFi jammer uses advanced centralized electronic countermeasure technology to effectively block WiFi and GPS signals.
It also has both narrowband jamming technology and RF suppression technology to accurately control the jamming frequency and reduce the impact on other devices. Cut off the connection between the drone and the remote control, forcing the drone to return. Under the control of the military drone WiFi jammer, the drone cannot work normally and cannot receive any instructions from the ground remote control, thus providing you with a key safety area.
In order to achieve better jamming effect, D-US-05-1 uses a multi-port plate-shaped directional antenna. The combination of five directional antennas gives the device all-round (360-degree) jamming capability, and in open areas, the jamming range can reach 1 km.
Interference Frequency:
> WiFi 2.4G: 2400 – 2484MHz
> WiFi 2.4G: 2400 – 2484MHz
> WiFi 5.8G: 5725 – 5850MHz
> WiFi 5.8G: 5725 – 5850MHz
> GPS L1: 1565 – 1586MHz
Is military drone WiFi jammer D-US-05-1 too expensive? Not light enough? Then we recommend you choose our handheld anti drone jammer D-US-03, which is cheap, easy to carry and sufficient for daily use.
Advantages of D-US-05-1：
- The voltage-controlled oscillator (VCO) technology can quickly respond to frequency changes and provide effective interference signals.
- With its high power output of 210W, it can effectively block long-distance signals.
- The sturdy cast aluminum casing and waterproof design, integrated with 4 cooling fans, has efficient heat dissipation performance, ensuring wear resistance, scratch resistance and waterproofness.
- Independent module control can be flexibly adjusted according to operational needs, and the operation is intuitive and simple.
- Low power standby, energy saving and extended equipment life.
Maintenance tips:
Safe use: During installation and use, keep the device away from flammable materials and high temperature environments. The device should be placed in a well-ventilated location to ensure heat dissipation.
Regular inspection: Regularly check the interfaces and connections of the device to ensure that they are not loose or damaged. In particular, the antenna interface and power interface need to be ensured to be stably connected.
Clean the cooling system: Regularly clean the cooling fan and aluminum heat sink of the device to prevent dust accumulation from affecting the heat dissipation effect. Compressed air or a soft brush can be used for cleaning.
Specification:
| Total output power | 210W |
| Power consumption | 550W |
| Power supply | AC220V, DC28V |
| Antenna | with 5 omnidirectional antennas or directional antennas |
| Interference source | noise technology |
| Humidity | 30%-95% |
| Operating temperature | -20℃ to +55℃ |
| Interference range | 800m to 1km (depending on local signal strength) |
