Check out this precise communication jammer solution!
This desktop cell phone and UHF VHF Jammer is equipped with 12 antennas, covering a variety of signals such as 2G, 3G, 4G, and even 5G. Whether it is traditional GSM, CDMA or new LTE signals, it can effectively shield. In addition, with its wide frequency coverage, it can also shield a wide range of signal bands including VHF, UHF, GPS and WiFi, ensuring that the signal disappears completely in the specified area.
The reasonable spacing design of the antenna effectively avoids the overlap and weakening between signal interference, ensuring the uniformity and stability of signal shielding.
T-US-012-3 uses special technology to only affect the downlink frequency of the mobile system and will not interfere with the normal operation of the base station. This is crucial for some occasions that require precise shielding, and users do not need to worry that the jamming device will affect the normal operation of other surrounding electronic devices.
The low power design allows it to reduce electromagnetic radiation while ensuring the interference effect, reduce the impact on the surrounding environment and other electronic devices, and save power resources.
The device complies with international electronic equipment safety standards and has multiple safety protection mechanisms, including overvoltage, overcurrent and overheating protection, to ensure safe operation even in the event of unexpected current fluctuations and prevent damage to the device itself or other devices due to power problems or excessive use.
More Equipment Details
| bands | Class | Scope |
| 1 | GSM/CDMA | 860-960MHZ |
| 2 | PCS | 1930-1990MHz |
| 3 | 3G | 2110-2155MHz |
| 4 | 4G LTE700 | 699-798MHz |
| 5 | 4G LTE 2300 | 2350-2360MHz |
| 6 | 4G LTE 2500 | 2496-2690MHz |
| 7 | 5G 3400 | 3400-3600MHz |
| 8 | 5G 3600 | 3600-3900MHz |
| 9 | GPS | 1575-1610MHz |
| 10 | WiFi 2.4G | 2400-2484MHz |
| 11 | VHF | 135-175MHz |
| 12 | UHF | 400-470MHz |
| Output power | 2W per band (gain: 5.0dBi) | |
| Total power | 100 W | |
| Interference radius | 5-60 meters (depending on the strength of the local signal tower) | |
| Power supply | AC110-240V±10%, 50/60Hz | |
| Dimensions | 350×230×70 mm | |
| Weight | ≤8 kg | |
| Operating temperature | -20 to +50 ºC | |
| Installation | Indoor desktop or wall mounting | |
The 5G jammer T-US-012-3 How to use
Using this signal jammer is very simple. First, place the device in the area where the signal needs to be blocked, and install the antennas one by one according to the antenna numbers.
Tap the switch to activate the device, and its strong signal coverage can adapt to the needs of different scenarios (such as confidential rooms, examination venues, etc.), and transmit radio interference signals to the designated area.
After starting the device, all mobile devices within the working range will lose signal connection. At this time, prompts such as “No Service” or “Network Unavailable” will be displayed on the phone screen, all standby phones will not be able to access, and incoming calls will be directly blocked. For callers, the phone will behave as if it is turned off and cannot contact people in the blocked area.
Usage Status
During the use of T-US-012-3, all affected mobile phones will not be able to receive any signals, including text messages, calls, data traffic, etc.
Note: The signal of the jammer will not damage mobile phones or other electronic devices. It just temporarily blocks the communication link with the base station within the shielding range. Once the jammer is turned off, all mobile phones will automatically resume normal service and reconnect with the base station, and all text messages, missed call notifications and other information will resume normal push.
