Check it out! This box type cell phone and bluetooth jamming device has 6 independent channels (CH1 to CH6) with a total output power of 600W. Each channel is equipped with an independent control switch, allowing users to selectively enable or disable specific channels as needed.
It only interferes with the downlink frequency of the mobile system and does not affect the normal operation of the base station. It ensures that other signal bands in the mobile communication network can continue to operate normally while blocking the signal.
The housing is equipped with a stable lock to effectively prevent unauthorized personnel from opening it. The lid’s edges are sealed with large rubber gaskets to keep the interior dry, ensuring the normal operation of the internal components even in harsh environments such as high humidity or heavy rain.
Multiple vents and cooling fans ensure that the internal temperature is maintained within a reasonable range during high power output. At the same time, the device is equipped with overload, overtemperature and VSWR circuit protection functions to prevent damage caused by abnormal conditions and antenna problems.
High-quality components and soft-start circuit design make it stable under heavy loads and prevent the device from being damaged by excessive transient current.
The powerful cellular and wireless camera jammer has a built-in VCO (voltage-controlled oscillator) as a signal source, ensuring smooth, continuous operation without downtime (even in hot weather).
The modular design is connected by cables between modules, with a clear and neat structure, which simplifies repair and parts replacement, and is conducive to the expansion and subsequent maintenance of the equipment.
The control panel has a main power switch and individual channel controls. Each channel is equipped with an LED indicator light, which will light up when the device is powered normally, so that the operator can intuitively understand the working status of the current channel.
The T-US-B600 remote control function allows users to activate or deactivate the device from a distance through dedicated software, eliminating the need for manual operation in a wide deployment.
Supports remote control via a local area network (LAN) and is equipped with a complete software management system. Users can remotely operate various functions of the device through the network to achieve efficient, real-time monitoring and simplified operation.
T-US-B600 Interfering 6 bands signal
| Band | Frequency | Output power/channel |
| GSM 900 | 925- 960 MHz | 20 dBm/30KHz(min) |
| PCS | 1930-1990 MHz | 20 dBm/30KHz(min) |
| 3G | 2110-2155 MHz | 23 dBm/30KHz(min) |
| 4G LTE 1 | 790-826 MHz | 22 dBm/30KHz(min) |
| 4G LTE 2 | 2620-2690 MHz | 19 dBm/30KHz(min) |
| WiFi 2.4G | 2400-2484 MHz | 23 dBm/30KHz(min) |
Note:Don’t need such a high-power camera jammer for daily use? Want a device that covers WiFi signals more comprehensively? I recommend you buy this cheap P-US-03-3, which can counter all wireless camera frequency bands and protect your personal privacy.
More product information
Power requirements: AC110-220V
Shielding range: 50-600m (depending on the distance to the local signal tower)
Output power: 600W
Power consumption: 1800W
Continuous working time: 24 hours
Humidity range: 30%-95%
Operating temperature: -20 to +55 degrees Celsius
