The High Power Frequency Jammer is designed for continuous operation.
When you connect the power supply with an AC110-240V AC charger or a DC12V car charger, it can provide you with 24 hours of uninterrupted working time.
This means that within a range of up to 60 meters, the remote control 315/433/868MHz signal is completely blocked, the Lojack signal is also excluded, and even the walkie-talkie cannot be used.
In addition, it can effectively intercept the mobile network signal between the transmitter and the mobile phone, whether it is a 2G Android phone or a 4G iPhone, it is forced into a “no service” state. For a detailed frequency list, please see the table below:
| CDMA & RC868 (Remote Control) | 851-894MHz |
| DCS | 1805-1880MHz |
| 4G LTE USA iPhone | 700-800MHz |
| 4G Wimax sprint | 2500-2700MHz |
| 3G | 2110-2170MHz |
| GSM | 925-960MHz |
| Bluetooth & WIFI 2.4G | 2400-2500MHz |
| GPS L1 | 1570-1580Mhz |
| RC315 (Remote Control) | 315MHz |
| RC433 (Remote Control) | 433MHz |
| UHF & Walkie-talkie | 400-470MHz |
| VHF & LOJACK | 135-175MHz |
This high-quality high power frequency jammer is commonly deployed in schools, residences, office buildings, and various other locations. If you have a need to protect confidential data, this is a frequency blocking devices with high practical application value that cannot be missed.
Due to the large size of the jammers (length 35CM, width 24CM, height 10CM, not including antenna) and heavy weight (5.5kg), it’s therefore advised that when installing the device at an elevated position, precautions should be taken to keep children at a safe distance to prevent any accidents.
This powerful desktop frequency blocker features an omnidirectional antenna that can scan 360 degrees to capture interference targets. The angle of the antenna can also be adjusted up to a right angle (90°) depending on placement.
Equipment maintenance:
- The desktop blocker should be placed in a well-ventilated place, try to avoid being blocked by large objects, and avoid strong electromagnetic sources of strong heat sources to ensure the shielding effect and long-term stable operation.
- When the high-power frequency jammer is working, other items must not be stacked on it and the antenna must not be disassembled to avoid affecting the shielding effect and damaging the machine.
- Since the power supply and antenna are specially matched with the host, and they are debugged one by one during factory debugging, please try not to use them interchangeably to ensure the best effect.
- Please stay away from corrosive gases and liquids, and do a good job of dust and moisture prevention to avoid accelerating the aging of internal components of the device.
