P-W6 Pro is designed to block modern surveillance devices (such as pinhole cameras, eavesdroppers, wireless headphones, etc.) that transmit data via Bluetooth and WiFi, preventing private sensitive information from being easily stolen or abused.
Features of P-W6:
Assembled with military-grade DSP chips. Dedicated filtering technology avoids the trouble of indiscriminate interference, specifically targeting narrowband radio signals for effective attack, and does not affect the normal use of other non-target devices (such as satellite TV, GPS navigation, mobile phone calls, etc.).
The Wi-Fi bluetooth blocker is equipped with four built-in relay antennas and provides up to 2W of transmission power. Using innovative RF interference technology, it can counter most micro devices within a range of 2-5 meters (conventional transmission power is 0.05mW to 20mW).
The high-resolution display shows the channel name and interference frequency in real time. If a channel is not lit, it means that there is no interference on that frequency and it is not activated.
The shell is made of durable ABS plastic and is designed to look like a common USB device, completely hiding its true purpose, suitable for concealed use in various scenarios.
Thermally conductive silicone sheets and micro air ducts are integrated inside to dissipate heat, which can keep the core components stable even when running for a long time.
P-W6 Pro can be started by connecting to a 12V DC power supply through the USB interface, and the use time is determined by the power type. It is recommended to choose a 12V portable battery when moving, which can not only power the device, but also serve as an emergency power supply to charge the mobile phone when the power is off, providing short-term autonomy. If it needs to be used fixedly, a 110-220/12V voltage converter can ensure long-lasting and efficient performance.
How to use bluetooth and WiFi jammer?
1. Start the device: Turn on the device after connecting the power supply, and check the display to ensure that all channels are activated normally.
2. Verify the shielding effect: Try to search for WiFi networks or use Bluetooth devices in the coverage area. If no signal can be detected or the connection fails, it means that the interference is successful.
3. Choose a suitable power supply: Choose a USB interface direct power supply, a car OBD interface or a home AC/DC power converter for power supply according to the use requirements.
As the most basic low-power WiFi jammer, P-W6 Pro can only interfere with WiFi signals in a very small range. If you need to block WiFi signals at a longer distance, you can consider the better-performing T-US-03. Although it is slightly less concealed than the P-W6 Pro, it is popular with customers due to its maximum total output power of 6W and wider coverage.
