This 6-antenna Mobile Network Signal Jammer can effectively suppress devices running CDMA, 3G, 4G, and WiFi 2.4G signals, destroying common information leakage channels.
Supports standard 220V AC input (for fixed facilities) and 12V DC input (for vehicles or mobile deployment). It can run 24 hours a day.
Desktop 4G Phone Scrambler Operation Instructions:
Before the device is powered on, make sure all antennas are firmly installed according to the number. Do not turn on the device if it is missing or damaged to avoid damaging the hardware.
After 3-7 minutes of startup, the power is gradually pulled to full and enters the efficient shielding mode.
The installation location should avoid areas with severe signal reflection or absorption such as large pieces of metal and reinforced walls. It is recommended to be close to the center of the room or suspicious signal sources (eavesdropping devices, etc.) for the best interference effect.
Maintain good ventilation during use and do not block the side ventilation and heat dissipation holes. Do not allow moisture, corrosive vapor, dust or chemicals to contact the product body and power supply.
T-US-12S interference range under ideal conditions:
- CDMA 850: Up to 60㎡
- 3G/4G: Up to 40㎡
- Wi-Fi and Bluetooth: Up to 60㎡
Note: The interference range depends not only on the characteristics of the blocker, but may also vary due to external factors such as base station distance, signal load and environmental obstacles. These figures are peak performance under optimal conditions, so please place it reasonably for best results.
Basic specifications:
Antenna length: 55 mm
Dimensions (without antenna): 300 x 173 x 63 mm
Operating temperature range: -20 °C to +40 °C
Relative humidity does not exceed: 85%
